SeaLand 4400 Series Toilet Installation - Manual (Page 9)

9
Dometic 4300/4400 Series Toilets Installation
19 20 21
18 . Set the toilet in place on the floor flange (fig . 19 ) and secure to floor with #14x2-1/2 inch long
lag bolts (fig . 20 ) . Install decorative bolt caps by pushing them onto bolt heads (fig . 21 ) .
19 . Turn on electrical power and water to toilet . Lift flush handle and fill toilet bowl with water . Wait
one hour, then inspect the floor around and under the rear of the toilet for leaks or dampness .
If no leaks are present, toilet is ready for operation .
Wiring diagram
22