RED REDLINK™ BRIDGE - Manual (Page 23)

REDLINK BRIDGE OPERATION GUIDE
COPYRIGHT © 2014 RED.COM, INC 955-0064, REV-B | 23
CANNOT CONTROL FOCUS OR IRIS
SYMPTOM
After successfully connecting the T.H.C. to the REDLINK Bridge, adjusting the Focus and Iris knobs on the
T.H.C. does not change the Focus and Iris of the lens.
POTENTIAL RESOLUTIONS
Ensure that the switch on the side of your lens is set to autofocus. The switch label depends on the type
of lens:
‒ Canon: Switch to AF.
‒ Nikon: Switch to M/A.
In the DSMC menu, go to Menu > Focus, and ensure that Manual is selected from the Mode drop-down menu.
The lens function (Focus or Iris) may be locked. For information about how to remove a lens lock, see the
RED 3-AXIS LENS CONTROL SYSTEM Operation guide , available at www.red.com/downloads .