Redlink bridge operation guide – RED REDLINK™ BRIDGE User Manual

Page 14

Text mode
Original mode

REDLINK BRIDGE OPERATION GUIDE

955-0064, REV-B | 14

8. If you selected WEP as the encryption option, type the passphrase that will be required to access the net-

work. The passphrase must meet the following WEP requirements:

‒ The passphrase must be exactly 10 characters long.

‒ The passphrase must be in hexadecimal format (only 0–9, A–F).

9. Close the WiFi screen.
10. Connect your device to the ad-hoc network created by the REDLINK Bridge. The steps in this procedure

depend on what type of device and operating system you are using. For example, if you are connecting an

iOS device, go to Settings > Wi-Fi > Devices, and select the camera name. The camera is identified by the

SSID, which also displays on the WiFi screen in-camera.
NOTE: If you created a passphrase for the network, you will need to enter that passphrase.

The DSMC and your device are now connected.