Dvd video player/outputs/supplied accessories, Specifications – Philips DVD400AT99 User Manual
Page 39
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
others J
Specifications
DVD Video Player/Outputs/Supplied Accessories
[DVD Video Player]
Power supply
120 VAC, 60 Hz
Power consumption
20 W
Weight
3.4 kg
External dimensions
430 X 81 X 308 mm (W/H/D)
Signal system
Standard NTSC
Laser
Semiconductor laser, wavelength 650 nm
Frequency range (digital audio)
4 Hz to 20 kHz
Signal-to-noise ratio (digital audio)
More than 96 dB (EIAJ)
Audio dynamic range (digital audio)
More than 93 dB (EIAJ)
Harmonic distortion (digital audio)
Less than 0.006 %
Wow and flutter
Below measurable level (less than ±0.001 % (W.PEAK)) (EIAJ)
Operating conditions
Temperature: 5 °C to 35 °C, Operation status: Horizontal position
[Outputs]
Video output
1.0 V (p-p), 75 Cl, negative sync., pin jack x 1
S video output
(Y) 1.0 V (p-p), 75 O, negative sync., Mini DIN 4-pin x 1
(C) 0.286 V (p-p), 75 a
Audio output (digital audio)
0.5 V (p-p), 75 Cl, pin jack x 1
Audio output (analog audio)
2.0 V (rms), 330 Q, pin jack (L, R) x 1
[Supplied Accessories]
S video cable...................................... ............................... 1
Audio/video cable................................ ............................... 1
Remote control.................................... ............................... 1
Batteries (AA)...................................... ............................... 2
Designs and specifications are subject to change without notice.
39