Connecting to a tv – Philips DVD400AT99 User Manual

Page 11

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Connect the DVD video player to your TV.

Connections^

Connecting to a TV

<’

' "

Set the AUDIO SELECTOR

to “PCM (ANALOG ON).”

-13-

AC-3IANALOG OFF)

PCM I ANALOG ON)---------

AUDIO SELECTOR

To wall outlet

Power plug

To ANALOG AUDI

If the TV has an S video input, connect the DVD
video player with the supplied S-video cable. Use
this custom S video cable, and connect the end with

the filter to the DVD video player’s S VIDEO OUT
jack as illustrated.

S video cable (supplied)

To S video input jack

Audio/video cable (supplied)

To video input jack (yellow)

(white)

(¡25)

To audio input jacks

If your TV has an RF (Antenna In) jack only, use

an RF modulator (not supplied) to connect the

DVD video player to your TV.

Notes

TV or monitor with
audio/video input jacks

Set your TV to accept Auxiliary

(Line) input. See your TV
owner’s manual for details.

■ Be sure to refer to your TV owner’s manual as well.
' When you connect the DVD video player to your TV, be sure to turn off the power and unplug both units from the wall outlet before making any

connections.

' If your television has one audio input, use a Y cable adapter (not supplied) to connect to your TV.
' Connect the DVD video player directly to your TV. If you connect the DVD video player to a VCR, the playback picture will be distorted because

DVD video discs are copy protected.