Philips MC5037 - Manual (Page 22)

Tape Operation/Recording
Note:
- During rewinding or fast forwarding of a tape, it
is also possible to select another source (CD,
TUNER orAUX, for example).
IMPORTANT!
Recording is permissible if copyright or
other rights of third parties are not
infringed upon.
General Information on
Recording
For recording, use only tape of lEC type
(normal tape) or lEC type II (CrO^).
The recording level is set automatically regardless
of the position of the Volume, Incredible
Surround, BASS/TREBLE, and so forth.
The tape is secured at both ends with leader
tape. At the beginning and end of the tape,
nothing will be recorded for six to seven
seconds.
To prevent accidental recording, break out the
tab on the left shoulder of the tape side you
want to protect.
(.hlID
if ‘ " Is displayed, the protection
tab has been broken. Put a piece of clear
adhesive tape over the opening. Do not cover
the CrOj tape detection hole when covering the
tab opening.
^DUni^
Preparation for Recording
1
Press TAPE to select tape mode,
’
2 Load a recordable tape into the tape deck.
3 Press M or N to select the recording tape side,
M appears on the display for the reverse ;
side.
► appears on the display for the fooa/ardi
side,
4
Press AUTO REV. on the remote control
repeatedly to select a recording mode.
~ for recording on one side only,
for recording on both sides.
5 Prepare the source to be recorded.
CD 1*2*3 - load the disc(s),
TUNER - tune to the desired radio station.
AUX - - connect external equipment.
When recording is in progress
mia starts flashing,
• It is not possible to change tape side,
0 It IS not possible to listen to another source,
• It is not possible to activate the timer function.
One Touch Recording
1
Press CD 1*2*3, TUNER or AUX to select the
source,
2 Start playback of the selected source.
3 Press • REC to start recording.
To stop recording
• Press ■ on the system.
Note:
- One Touch Recording is not possible in TAPE
mode, "bt;:,i..E'C E;0(..iRCE" will be displayed.
22