Philips MC5037 - Manual (Page 14)

Basic Functions
Demonstration mode
The system has a demonstration mode that
shows the various features offered by the system.
To activate the demonstration
0 In Standby mode, press and hold
DEMO STOP on the system until
"L.ltfll.i Ur!" is displayed.
The demonstration will begin.
To deactivate the demonstration
• Press and hold DEMO STOP on the system
until" " is displayed.
The system will switch to Standby mode.
Note:
- Even if you remove the AC power cord and
reconnect it to the wall socket, the demonstration
will remain off until you activate it again.
Switching the system on
In Standby/Demonstration mode
• Press STANDBY ON
The system will switch to the last selected
source.
• Press CD 1 *2*3 (CD 123), TUNER TAPE,
AUX/CDR
The system will switch to the selected source,
• Press any one of the CD OPEN'CLOSE
(CD / CD 2^ / CD 3:^) button
The system will switch to CD mode.
Switching the system to Standby
mode
In Demonstration mode
• Press and hold DEMO STOP on the system.
In any other source mode
• Press STANDBY ON (or (!) on the remote
control).
The clock will appear on the display when Lhe
system is in Standby mode.
Note:
- If you have not deactivated the demonstration, it
will resume five seconds after the system switches
to Standby mode.
Power Saving Automatic Standby
As a power-saving feature, the system will
automatically switch to Standby mode if you do
not press any buttons within 30 minutes after: a
disc or tape has stopped playing. ,
Dim mode
Tbu can select the desired brightness for the |
display I
Press DIM repeatedly to select DIM 1, DIM 2,
DIM 3 or DIM OFF display mode. I
DIM and the corresponding mode numberiwil
appear on the display, except for DIM OFF
mode, '
DIM OFF........... All available LEDs light up, display
screen will have full brightness,
music level bar active.
DIM 1................ Some LFDs light up, display
screen will have full brightness,
music level bar inactive.
DIM 2................ All lightings turn off display
screen will have full brightness,
music level bar inactive,
DIM 3................ All lightings turn off display
screen will be at half brightness,
music level bar inactive,
I I music level bar
Volume Control
Adjust VOL to increase (turn knob clockwise or
press VOLUME +) or decrease (turn knob
countcndockwise or press VOLUME —) the
sound level.
" will be displayed. "Xx" denotes
the volume level.
^ When reached the minimum volume level,
" " will be displayed.
To listen through the headphones
Connect the headphones plug
to the PHONES socket at the
PHONES
front of the system.
The speakers will be muted. O
14