Canon Elura 2 MC - Manual (Page 94)

Selecting the recording image quality
Select the quality of a still image to be recorded.
QUALITY•••••FINE CARD SET UP
( 34)
Make sure the POWER dial lock lever is switched to the 2 22 2 position. Open
the menu and select CARD SET UP. Then select QUALITY, set it to
STANDARD and close the menu.
CARD
R E C
VCR
94
E
Using the MultiMediaCard
(ELURA2 MC only)
Inserting and removing the MultiMediaCard
MultiM
edia Card MM C-8M
MR
MultiM
1. Turn the POWER dial to OFF.
2. Slide the MultiMediaCard compartment cover in the direction of
the arrow and open.
3. Insert or remove the MultiMediaCard.
• Push the MultiMediaCard all the way in.
• Remove the MultiMediaCard by pushing the card in and letting it spring
out.
Do not attempt to pull the MultiMediaCard out without first pushing it in.
4. Close the cover.
• When you set the POWER dial to CARD PLAY, the last image recorded
appears. If there are no images recorded on the MultiMediaCard, NO IMAGES
appears in the display.
• Do not touch the MultiMediaCard terminals.
5_ELURA2_E(93-115) 7/25/00 17:25 Page 94