Canon Elura 2 MC - Manual (Page 54)

54
E
Using the Full
Range of Features
1. Slide the program selector to
Q (program AE) mode.
2. Press the SELECT dial in to display the program menu.
3. Turn the SELECT dial to move the arrow up or down the display.
4. Press the SELECT dial in to select the desired program.
• The program will appear in the display.
5. Press the start/stop button to begin recording.
• The name of your selected recording program appears constantly on the left of
the display, with the exception of Auto, which is displayed and then disappears
after 4 seconds.
• Avoid changing programs during recording as the brightness of the image may
change suddenly.
• The specialized AE programs are not suitable for all kinds of lighting. The
image may flicker, or a bright line may appear on the screen if you use them in
the wrong lighting conditions.
• If you switch the camera from the [ program to the
Q
program, the camera
returns to the Auto program.
• When recording in dark places a bright light in the
scene may cause a vertical light bar (“smear”) to
appear. This is a normal feature of camcorders.
Setting the program AE mode
CARD
R E C
MOVIE P.SCAN
3_ELURA2_E(33-79) 7/25/00 17:09 Page 54