Canon Elura 2 MC - Manual (Page 19)

19
E
Mastering the Basics
Confirmation/Warning beeps
The camera’s short operation confirmation beeps are indicated by ` in the
illustrations. Beeps sound upon certain camera operations such as when you turn
the camera on, during the self-timer countdown, right before the camera’s
automatic shut-off, and also upon any unusual condition of the camera. Beeps are
not recorded on the tape.
BEEP••••••••ON SYSTEM
( 34)
To turn the beep off, open the menu and select SYSTEM. Then select BEEP,
set it to OFF and close the menu.
About the POWER dial lock lever
The POWER dial lock lever has been preset to the 2 position. Switch it to the
22 position when you want to use the P. SCAN (
48) and CARD REC
(ELURA2 MC only, 97) modes. It is recommended that you return the lock
lever to the 2 position when you finish recording.
ELURA2
2: VCR, OFF, MOVIE
22: VCR, OFF, MOVIE, P.SCAN
ELURA2 MC
2: CARD PLAY, VCR, OFF, MOVIE
22: CARD PLAY, VCR, OFF, MOVIE, P.SCAN, CARD REC
CARD
R E C CARD
PLAY
MOVIE P.SCAN VCR
2_ELURA2_E(08-32) 7/25/00 17:03 Page 19