Canon Elura 2 MC - Manual (Page 127)

127
E
Additional Information
Miscellaneous
Cause and/or what to do about it
• The remote sensor mode is set to
OFF
B in the menu (
43).
• The remote sensor modes of the
wireless controller and the camera
itself are different (
43).
• The batteries are dead or not inserted.
• Check the screen displays ( 132).
• External interference may cause the
camera’s microprocessor to
malfunction temporarily. If random
letters appear in the display or if
normal operation is interrupted,
remove and then replace the power
source.
• Remove the cable and then reconnect
it or turn the power off and back on
again.
• This is not a malfunction.
Problem
? The wireless controller doesn’t
work.
? The power indicator is flashing.
? The camera malfunctions.
? The DV cable is connected
correctly, but there’s nothing in
the display.
? The camera becomes warm
during use.
• The MultiMediaCard is not loaded
( 94).
• The MultiMediaCard is full. Erase
images ( 104) or insert a new
MultiMediaCard.
• You have reached the maximum file
number. Set the file numbering to
RESET through the menu (
96)
and insert a new MultiMediaCard.
• You are using an unformatted
MultiMediaCard. Format the card
(
112).
• The image is protected ( 103).
? The PHOTO button doesn’t work.
? The image cannot be erased.
6_ELURA2_E(116-146) 7/25/00 17:33 Page 127