Canon A50 - Manual (Page 97)

97
Appendices
Problem Cause(s) Solution(s)
• Firmly close and lock the CF card slot
cover.
• Replace the CF card.
• Load the CF card data onto a computer
and erase all or some of the card’s images
to create space.
• Format the CF card.
• The logic circuits of the CF card may be
faulty or damaged. Please consult the
nearest Canon Customer Support Help
Desk.
• Close the CF card slot cover and reset
the Mode Dial to the L (Lock) position.
• Lock the battery cover and reset the
Mode Dial to the L (Lock) position.
• Restrict use of the battery to places with
ambient temperatures over 32
°
F (0
°
C).
When taking shots in relatively cold
conditions, keep the camera warm next
to your body or in a pocket. (p.21)
CF card slot cover is open
(Display Panel flashes “CF”)
CF card full (O is displayed in the
Display Panel and a continuous
beep sounds when the shutter
button is pressed)
CF card not formatted correctly
(Display Panel flashes “CF”)
CF card slot cover was accessed
immediately after Mode Dial was
turned to the L (Lock) position
Battery cover lock was opened
immediately after Mode Dial was
turned to the L (Lock) position
Low ambient temperature has
diminished battery output
Camera will not shoot
Lens will not retract
Battery fails prematurely