Canon A50 - Manual (Page 11)

11
Read This First
• Do not attempt to disassemble or alter any part of the equipment that is not expressly prescribed in this
guide. Disassembly or alteration may result in high-voltage electrical shock. Internal inspections,
alterations and repairs should be conducted by qualified service personnel authorized by your camera
distributor or a Canon Customer Support Help Desk.
• Do not touch the interior of the flash if it is exposed. Touching it may result in electrical shock. Please
consult your camera distributor or the closest Canon Customer Support Help Desk.
• Stop operating the equipment immediately if it should emit smoke or noxious fumes. Failure to do so may
result in fire or electrical shock. Immediately power off the camera: turn the Mode Dial to the L (Lock)
position and remove the camera battery or unplug the compact power adapter from the electrical outlet.
Confirm that smoke or fume emissions cease. Please consult your camera distributor or the closest Canon
Customer Support Help Desk.
• Stop operating the equipment if it is dropped or the casing is damaged. Failure to do so may result in
fire or electrical shock. Immediately power off the camera: turn the Mode Dial to the L (Lock) position and
remove the camera battery or unplug the compact power adapter from the electrical outlet. Please consult
your camera distributor or the closest Canon Customer Support Help Desk.
• Prevent the equipment from contact with, or immersion in, water and other liquids. Do not allow liquids
to enter the interior. The camera has not been waterproofed. If the exterior comes into contact with a
liquid or salt air, wipe it dry with a soft, absorbent cloth. In the event that water or other foreign
substances enter the interior, immediately power off the camera: turn the Mode Dial to the L (Lock)
position and remove the camera battery or unplug the compact power adapter from the electrical outlet.
Continued use of the equipment may result in fire or electrical shock. Please consult your camera
distributor or the closest Canon Customer Support Help Desk.
• Do not cut, damage, alter or place heavy items on the power adapter cord. Any of these actions may
cause an electrical short circuit, which may lead to fire or electrical shock. Replace a broken or damaged
power adapter cord.