Canon A50 - Manual (Page 61)

61
Stitch Assist Mode
Set the Mode Dial to the (Stitch Assist)
position and follow the procedures below to
merge several images into one large panoramic
scene. In Stitch Assist mode, images can be
shot in horizontal, vertical or 2x2 (matrix)
sequences. The merged image cannot be
viewed in the camera’s LCD panel.
Buttons Available
in Stitch Assist Mode
FLASH Button
• The Auto, Red-Eye Reduction, Flash On
and Flash Off modes can be set with
the Flash button.
MACRO Button
• The Macro mode for shooting
photographic subjects 6.7 to 20in. (17 to
50cm) distant from the lens can be set
with the Macro button.
Stitch Assist Mode
Retaking a Picture
• In this mode, repeatedly pressing the
+ button enables you to scroll through
the images to confirm the current
merge sequence and to retake an
image if required.
• To retake an image in a horizontal or
vertical sequence, press the + button
to return to the previous image and
take the shot. Press the + button again
to return to the original image.
• To retake an image in a 2x2 (matrix)
sequence, press the + button to
advance to any image that you wish to
replace and take the shot.
When a Sequence is Complete
• When you have completed shooting a
sequence, press the SET button to
return to the Stitch Assist menu.
• To exit Stitch Assist mode, turn the
Mode Dial to another setting, such as
the L (Lock) position.