OmniSistem Q Scan - Manual (Page 4)

Note: If Audio and Mic are both used then sound adjust controls balance.
DMX functions selected via the base address:
MODE:
DECIMAL:
Circle Patterns 0>7
Line Patterns 8>15
Spiral Patterns 16>23
Waves Horizontal 24>31
Fan Horizontal 32>39
Fan Vertical 40>47
Beams Series 48>55
Beams Random 56>63
Sound Graphics 64>71
Sound Beams 72>79
Customs 80>87
Sound Tunnels
88>95
Stored Text 96>103
Sound Fans 104>111
Specials 112>119
Scenes
120>127
Text line1 128>135
Text line2 136>143
Text line3 144>151
Text line4 152>159
Text line5 160>167
Text line6 168>175
Text line7 176>183
Text line8 184>191
Edit line1 192>199
Edit line2 200>207
Edit line3 208>215
Edit line4 216>223
Edit line5 224>231
Edit line6 232>239
Edit line7 240>247
Edit line8 248>255
DMX use is 8 channels (base => base+7) and base can be from 1 to 503.
See QSCAN MODES section for more details about the various modes.
See the DMX Control Table for more DMX details of base+1 to base+7 controls.
Text edit lines 1-8 accesses 8 lines of text, 80 characters each.
Text is edited by selecting the text line 1-8 (DMX base=192+8 per line).
Use fader base+1 to select the character position 1-80 to change.
Use fader base+2 to select a symbol, number, or letter for that position.