OmniSistem Das Light - Manual (Page 18)

- User manual - Manuel d’utilisateur - Manual del usuario -
18
Live page options
In the Live page, you can see:
• The scene-buttons 1).
• The effect-buttons 2).
• The scene-option buttons 3).
• The effect-option buttons 4).
Each scene-button is red and corresponds to a scene that has been
programmed on the scene page. Each button represents a scene which can
be activated via the mouse, the keyboard or externally. If the button is
pressed, the scene is activated. You can activate only 1 normal scene at a
time.
The option-buttons in the area 3) are ordered as follows:
• Switch in normal scene / virtual scene. To activate normal scene mode
(red button) or virtual scene mode (blue button).
• Freeze, allows a break, current scene-motion stops instantly.
• Fade between each scene, during scene-transition, that takes the
fade-time of the first step of the following scene into account.
• Play cycle activates a cycle and a transition from a scene to the next
one. This mode can only be used with scenes having a Next option.
• Previous button, to go to the previous scene.
• Next button, to go to the next scene.
If Play cycle is not activated, the current scene will stop at its
latest step after completing its loops.
You can see a smaller screen against a black background 3) to visualize the
scene-related data:
• Scene time (scene-duration) and scene remaining time. Duration
depends on the number of steps, of loops and scene-speed.
• Number of loop / remaining loop(s) in the current scene.
• Scene running speed.
To change data on the displayer, just click on the descriptive
data-related text.
To modify scene-speed, please remember to de-activate Default
speed in the displayer.
AUTO / LTP / HTP options
In the cursor-window 6), you can see an Auto button to manually control your
channels.