OmniSistem Das Light - Manual (Page 16)

- User manual - Manuel d’utilisateur - Manual del usuario -
16
At the end of a cycle, the final scene can:
• Be played over and over again.
• Stop at the last step in the current scene after completing its loops.
• It is also possible to return to any scene.
4 colors will guide you through this process.
• A scene at the beginning of a cycle is recognizable by its green color.
• Intermediate scenes are recognizable by their yellow color.
• An end-of-cycle scene is recognizable by its red color.
• Transitional scenes (at the beginning & at the end) are blue.
It is possible to create an unlimited number of manually-triggered
cycles.
Only one cycle can be played at a time.
Scene modification and creation
To create a scene:
• Select the scene that needs modifying or create a new scene.
• Select the step or program that needs changing.
• Change the channel-values in the cursor window.
• Create a new step or select the next one.
• Change the channel-values in the cursor window.
• Repeat these 2 steps as long as necessary.
• Apply your fade and wait time to your steps.
• Include the current scene in the cycle.
• Save the program.
In Live all the pre-programmed scenes will be displayed as a virtual button.