Oakworks Interventional Supine Pillow System - Manual (Page 2)

USER MANUAL - INTERVENTIONAL SUPINE PILLOW SYSTEM CONT...
CLEANING & DISINFECTION
Use appropriate sterilized field materials to isolate the patient from the Interventional Supine Pillow System. This also
minimizes cleaning and disinfecting procedures, prolonging the useful life of the system.
Use a 10% sodium hypochlorite (bleach) solution or
Recommended Disinfectants on all surfaces. Clean all sides of each pad.
Follow the directions on the disinfectant and wipe off excess.
Recommended Disinfectants
Protex, MadaCide, Accell TB, Virox ®
Note: Damage caused by unapproved substances will not be covered under the warranty.
MODEL NUMBER LOCATION
WARRANTY INFORMATION
Use appropriate sterilized field
SPECIFICATIONS
Dimensions (X Y Z) Pillow - 10.5” x 14” x 3.25” (27cm x 36cm x 8cm)
Support Wedge - 10.5” x 16.5” x 1.5” (27cm x 42cm x 4cm)
Maximum Weight
Rating
20 lbs. (9 kg)
Radiolucency
Pillow - Max of .70mm AL @ 100 kVp. HVL of 3.6mm
Support Wedge - Max of .70mm AL @ 100 kVp. HVL of 3.6mm
Environmental
Conditions
Temperature: 50°F (10°C) to 100°F (38°C)
Humidity: 20% to 60% RH
Atmospheric Pressure: 98 to 105 kPa
MAINTENANCE & SERVICE
Inspections
• Inspect the pads for areas where ingress of fluids is possible due to damage to the covering. Discard if found.
REPLACEMENT PARTS
• PN 72016: Pillow
• PN 72017: Support Wedge
Part Number Tags:
72016: Pillow
72017: Support Wedge
X
Y
Z
Z
Part No. MMMNUP0004 Rev. B
Phone: 717-235-6807 www.oakworksmed.com
923 East Wellspring Rd. New Freedom, PA 17349