Oakworks Trolley - Manual (Page 6)

5
product InformatIon
product
information
how to care for your trolley
• Use only a mild solution of 4:1 diluted non-alcohol cleaner such as
Simple Green®, 409®, Fantastik® or some other non-abrasive cleaner to
wipe down the metal surfaces of the trolley. Apply with a damp (not wet)
lint-free cloth. Be sure excess liquid does not drip onto, or into, any of the
electrical controls or mechanisms. Be sure that the unit is unplugged before
cleaning these areas. Wipe these areas carefully with a lint free cloth.
• The slides and casters of your trolley require no general maintenance or lubrication.
• The wooden portions of the equipment can be polished with any polish
approved for wooden surfaces. Spray, or pour, the polish onto a soft cloth
and be careful not to get it onto other surfaces.
• The table top material may stain if it is subjected to prolonged exposure of
dark liquids and chemicals. If a mild solution does not remove the stain, the
top will need to be re-surfaced by sanding and polishing with an approved
compound of 1200 grit polish or finer.
• Water spills or condensation should be removed immediately from surfaces.
operatIng drawer wIth work Surface
Pull the work surface the
whole way out to conceal
your supplies and for
extra working space.
Easily push the work surface the whole way back
allowing access to the drawer and your supplies.
PERMISSIBLE ENVIRONMENTAL CONDITIONS
conditions temperature humidity atmospheric pressure
normal use 50° (10°c) to 100° (38°c) 20% to 60% rh 98 to 150 kpa
storage & transport -20° (-29°c) to 135° (57°c) 20% to 95% rh 98 to 150 kpa
permISSIble envIronmental condItIonS