Oakworks Powered ABC - Manual (Page 3)

www.oakworks.com page 2
USE WITH TABLE WARMER & SHEETS
If you use a fleece warmer, you can stop
short of the ABC cushion, or you could
cover it. For some larger clients you may
find having it uncovered is best.
Your ABC System works well under a
fitted sheet.
Start with the ABC cushion level with the top of the table. Your client can put their
head on the cushion. Use the “up” hand valve to raise the cushion to a comfortable
height.
THE ABC SYSTEM CAN BE USED FOR PRONE OR SUPINE POSITIONING
FOR BOTH MEN & WOMEN
Start with the ABC cushion level with the top of the
table. If the cushion is tilted, you can easily level it
with your hand. Raise your face rest platform up to a height and angle that
insures the head and neck are supported in a way so that the neck does not hit
the table. When your client lies down, make sure the neck is over the lowered
part of the table, and there is no pressure on the neck.
Release air very slowly by pressing the “down” hand valve for a few seconds at
a time. A little difference in height is all that is necessary to create a very
comfortable fit.
If you lower the cushion too far, use the “up” hand valve to slowly raise the
cushion back up. Check in with the client after a few minutes to see if any
further adjustment is needed.
The platform can also be used to create a great stretch. First, reverse the face
rest crescent on the platform, creating cervical support. Have your client posi-
tion themselves with their head on the head support and their upper back on
the ABC cushion.
You can now get a great stretch and better mobilization of the shoulders. Use
the “up” hand valves to raise the cushion, increasing the stretch. Do not over
inflate. Lifting a person too much can be uncomfortable.
USING YOUR ABC SYSTEM
PRONE POSITION
SUPINE POSITION
STRETCH