Oakworks Powered ABC - Manual (Page 2)

GETTING TO KNOW YOUR TABLE
CUSHION, BLADDER & BAG
page 1 www.oakworks.com
ABC cushion
& bladder
The cushion which you rest
upon is a padded platform and
it is attached to an inflatable
bladder. The flexible cushion
offers sternum support. The
inflatable bladder allows you
to change the height over a
large range and is attached
to a hose system. It sits inside a sewn bag which
supports the bladder.
Use of the special face rest platform with shortened
dowels requires attachment with a Velcro
®
support strap
to insure the face rest does not pull out. To attach the
Adjustable face rest, insert the dowels into the holes
on the end of the table. Wrap the Velcro
®
strip that is
attached to the table around the horizontal bar on the
face rest as shown to secure into place. Attach crescent
to top of platform. Follow face rest instructions to make
further adjustments.
Electrically controlled
hand valve to lower
cushion
Electrically controlled
hand valve to raise
cushion
Adjustable face
rest & platform
ABC bag
ADJUSTING THE HEIGHT OF THE CUSHION
TO LOWER THE CUSHION
Press the left hand valve up.
This opens the bladder and
allows air to escape. Air is released
automatically by the weight of the
client or by pressing down slightly
on the cushion with your hand.
TO RAISE THE CUSHION
Press the right hand valve up.
The height of the
cushion is electrically
controlled by two
hand valves.
The one on the left
lowers the cushion.
The one on the right
raises the cushion.
CAUTION: Do not over inflate
the bladder. Over inflation will
damage the bladder.
ATTACHING THE FACE REST
MAXIMUM HEIGHT OF PAD
ABOVE TOP = 5 INCHES