Oakworks Marina - Manual (Page 9)

6
DIReCTIOnS fOR USe
TAble COnTROl / bATTeRy USe
The movement of the table is powered by a battery. This allows a low voltage operation of the table
that is safe in all environments and is very suitable for wet treatment conditions. The battery is
easily charged in a separate charging unit outside of the wet environment.
To Turn the Table On:
Turn the red ‘Emergency’ button on the control
box, found under the table, in a clockwise direc-
tion.
To Turn the Table Off:
(for shipping, overnight, or to change the battery)
Push the red ‘Emergency’ button on the control box,
found under the table to turn the Control Box OFF.
To place the battery back into table after charging:
Push the red ‘Emergency’ button to turn the control box off. Open the Velcro ® hook and loop fastener flap
at the end of the battery unit. Slide the battery into the clear vinyl sling, pushing it into the metal bracket
above until it snaps into place. Turn the red ‘STOP’ button clockwise to turn the control box back on.
Be sure the
battery is
snapped
securely in
place before
turning the
unit back on.
To remove the battery for charging:
Push the red ‘Emergency’ button to turn the control box off. Open the Velcro ® hook and loop fastener flap
at the end of the battery unit. Pull the battery release lever found at the end of the battery unit.