Oakworks 300 Series Procedure Chair Rev.C - Manual (Page 8)

5
DIReCTIOnS fOR USe
CAUTIOn
HAnD COnTROl OPeRATIOnS
Do not sit on the Fowler (Backrest) or Leg Rest sections. Do not leave the patient unat-
tended. When lowering the chair or using the Trendelenburg functions, make sure there is
nothing that can impede motion (like stools, cabinets, accessory parts, cleaners, etc.)
The Multi-function Hand Control operates all functions by holding down one button at a time.
Follow the directions below to access these functions. If a function button does not release, pressing
and holding any other function button will stop the motion.
Use any of the top 8 buttons to orient the chair in a
favorite position. Press and release the MEM button
twice within five seconds and listen for two quick beeps.
Your position is now set when you use this button. To
set the chair into a different position, simply follow steps
above to readjust your memory position.
MeMORy fUnCTIOn USe
Trendelenburg - head
end down (up to 15º)
Reverse Trendelenburg -
foot end down (up to 5º)
Height Up Height Down
back Rest Down back Rest Up
leg Rest Down leg Rest Up
Zero-Gravity
fully down and
seated position
fully up and
flat position
Memory function