Novak Tempest Max ESC (1760) - Manual (Page 3)

PRODUCT
ADDENDUM
Updated 6/97 #AD-1760-1
THE ROCK-SOLID TEMPEST, JUST GOT BETTER !
The Tempest Pro electronic speed control is now stuffed full
of the most powerful transistors available anywhere, the
new HYPERFET III. These tough transistors drop the On-
Resistance down to an all-time low at 0.00067
Ω
. and crank
out an amazing 480 amps of Drive Current Rating. With
a built-in Schottky Diode and a 3.0 amp, 5.7 volt BEC
with overload protection the Tempest’s already rock-solid
performance and reliability just got better!
Along with the best components, we’ve also built-in Brake
Light Circuitry for realistic appearance of your car or truck
with our optional Brake Light Accessory Kit (part #5655).
Always on the cutting-edge of racing technology, Novak
wants the Tempest Pro to keep your performance at its best.
FIRST IN TECHNOLOGY, FIRST AT THE FINISH LINE!
The following is a product addendum for the Tempest Pro Electronic
Speed Control, which has been renamed, the Tempest Max.
The following is an addendum for the Tempest Max Electronic
Speed Control, and updates the CLC II current limiting circuitry.
#AD-CL-1
The Tempest Pro includes Novak’s CLC II current limiting
circuitry. This provides the ability to control the maximum
amount of current going to the motor upon acceleration by
adjusting the current limiter pot.
The instruction manual describes the use of a plastic knob
to adjust the current limiter pot. In this version the knob has
been removed and a plastic adjustment screwdriver* has
been included to adjust the pot. All other content of the
current limiting instructions (Step 6) remain unchanged.
Caution! Forcing the pot past its stop point can cause internal
speed control damage and void the warranty
.
* This screwdriver can also be used as a One-Touch Tool
to press down the “SET” button.
© 1996 Novak Electronics, Inc. • All Rights Reserved
O PERATING I NSTRUCTIONS A DDENDUM