NORAC UC4.5-BC Operator Manual - Manual (Page 7)

3
3 Key Features
Non-contact Sensing:
• Sensing is done using ultrasonic sensors which means no parts of the UC4.5 Spray Height
Control System come in contact with the ground.
• Using a non-contact system means there will be no additional forces put on the boom,
which could cause damage to the sprayer boom.
Automatic Software Setup:
• The system completes an automatic system setup, which calibrates the software
specifically for the sprayer.
• This provides the maximum performance for the height control system.
Individual Boom Overrides:
• When necessary one boom section can be put into manual mode to avoid an obstacle,
while the other boom sections stay in automatic.
• This can take the stress out of spraying along obstacles such as fences because the
operator only has to watch the boom along the obstacle, knowing that the UC4.5 is
maintaining the height on the rest of the boom sections.
Smart Sensor Technology:
• All sensors are designed by NORAC specifically for the agricultural industry.