NORAC UC4.5-BC Operator Manual - Manual (Page 6)

2
2 Safety Precautions
The UC4.5 Spray Height Control system will greatly improve spray height accuracy and protect
the boom against damage in a wide variety of field conditions. However, under some
circumstances performance may be limited. The operator of the sprayer must remain alert at
all times and override the automatic control when necessary.
CAUTION
Under no circumstances should any service work be performed on the machinery
while the UC4.5 Spray Height Control system is in the automatic mode.
Always ensure that the UC4.5 Spray Height Control system is powered down or in
manual mode:
• Before leaving the operator’s seat.
• While the machine is not moving.
• When transporting the machine.
Before working on any part of the booms:
• Set the UC4.5 system to manual mode.
• Turn the sprayer engine off.
Do not operate this system before:
• Reading and understanding the operator’s manual.
• Thoroughly understanding the machine operation.