NORAC UC4+BC+JD8A - Manual (Page 24)

20
Figure 22: Installed Roll Cylinder
In several cases, the lower
cylinder mount on the roll
control hydraulic cylinder has
failed. In the documented cases,
the bracket has failed at the weld
shown in Figure 23. It is
recommended that all sprayers
with roll control add weld to the
existing bracket to prevent
failure.
Some sprayers from 2005 and
newer already have gussets
added at the factory.
Figure 23: Roll Cylinder Mount Weld
Locations
Figure 24: Roll Cylinder Installed with
Hoses
Roll Cylinder