Firmware upgrade and reset to default, Firmware upgrade via direct internet access – Nixeus Fusion HD User Manual User Manual
Page 99
Nixeus Technology, Inc.
99
Firmware Upgrade and Reset to Default
Firmware Upgrade via Direct Internet Access
•
There’re two ways to upgrade the firmware. Go to ‘Setup’ in the main menu and select ‘Version’.
The current firmware version is shown there (eg. 01.00.02.14).
•
The first way to upgrade the firmware is by ‘Internet Upgrade’ which is a convenient option
without the necessity of a PC.
•
Make sure the Fusion HD is connected to the Internet before attempting a firmware upgrade.
Follow the steps below to update your firmware via the internet:
1. Go to “Setup Main Menu”, Select “Version” and then choose ‘Firmware upgrade”.