Nixeus Fusion HD User Manual - Manual (Page 28)

Nixeus Technology, Inc.
28
Wireless Connection without an Access Point
The Fusion HD supports wireless Ethernet with a USB Wi-Fi dongle. To enable wireless
function, please make sure you plug the Wi-Fi dongle into the USB port before powering on the unit.
1. Press Setup hotkey or select “Setup Main Menu”.
2. Select “Wireless Network Setup”, and set ‘Network Type” as “Ad-hoc” mode.
3. Configure an ESSID with software as you wish.
4. You may choose to configure security settings for this connection or not.
5. Press “BACK” button on remote control to save the settings.
6. Go to your PC to configure your PC to wireless network.
Wireless Configuration In Windows XP
Wireless Network Configuration
1. Click right button of mouse on wireless icon and select “View Available Wireless Networks”