Nixeus Fusion HD User Manual - Manual (Page 38)

Nixeus Technology, Inc.
38
TV Mode Setup
Please set the video source selector of your TV to match the connection to your unit. For example, if
you use HDMI, set the TV to use the correct HDMI input port.
1. Turn on the unit. The LED on the front panel of the unit will turn orange during system startup
and then green when it’s ready.
START-UP PAGE
2. Check the TV display by going to ‘Setup’ → ‘System Setup’ → ‘TV Mode Setup‘ → ‘Video
Output’.
3. The default display of the unit is Composite (CVBS). If you use HDMI, use the remote control to
press the “Output” button and cycle through the TV output modes to get the correct
display mode.