Nixeus Fusion HD User Manual - Manual (Page 103)

Nixeus Technology, Inc.
103
Reset to Default
You can restore the unit back to its factory default state by following the steps below:
1. Go to “Set Up Main Menu”, Select “Version” and choose “Reset to Default”.
2. Make sure you want to do this and then press the “OK” button to restore the system to the
default settings.
WARNING: Restoring the FusionHD to its default settings will
erase the network set up and media server configuration. You will need to set
up the FusionHD again to run on your network and to access media files.