New England Arbors VA84044 - Manual (Page 12)

Fastening Decorative Caps
1 2 6.5 x 6.5 Wood Grain Flat Top Pergola
2
Glue the post caps top and bottom using vinyl weld.
Glue the postcaps onto the posts.
Install decorative pergola end caps using vinyl weld.
1
2
S T E P S I X
1
Shade slats are designed to extend approximately 7 1/4” past
the last rafter. Measurement includes the pergola ends.
Your goal is to ensure that all the shade slats overhang
equally to the eye.
Install first and last shade slats 2“ away from the posts.
Install the rest of the shade slats at 10.5” spacing.
Install one 3” screw at each intersection of rafter and shade slat.
2
3
4
Shade Slats Installation
S T E P S E V E N 2
To assemble the shade slats, glue the 1 1/2” square pergola end caps
onto the end of the filters.
Shade Slat Assembly
1
1
3
4
10.5”