New England Arbors VA84045 - Manual (Page 19)

19 The Privacy Fence Panel
Install Fence (continued)
Install long and short u-channel accordingly in the middle of
the vinyl posts using 5/8” screws provided.
Install the tongue and groove privacy board working from
the tallest board to the shortest. The first board should sit
flush inside the u-channel.
Install the post bracket on one end of the arched rail. After
inserting into the top routed hole on the post, begin to “walk”
the rail down into place over the tongue and groove privacy
board.
Fasten the arch post bracket to the post using 5/8” screws provided.
Repeat for installation of the other fence panel.
Secure the vinyl post to the internal wood post as per illustrated
on page 9 of this manual step #8. Level and adjust as necessary
before fastening into place using the provided 1 1/2” screw.
Install the post cap using vinyl weld.
5
6
7
8
9
10
4
4
5
6
7
10
9
8”
3/8”
Bottom Rail
Inserted Only 3/8”
Into Middle Post.
www.newenglandarbors.com