Introduction, Before you begin – Mytek Digital DIO MADI Card (ver. 1.4 / May 2011) User Manual
Page 4
Mytek DIO MADI Card – User Manual
Introduction
The Mytek DIO MADI Card is a physical card that
plugs into the back of the Mytek 8X192 ADDA
converter.
With this card installed the Mytek 8X192 ADDA can
directly interface with other MADI capable
equipment. The card can be installed by the user as
described further in the manual.
Before You Begin
Before connecting the DIO MADI card, check if the
most current firmware (version 4.5.5 or later) is
installed in the 8X192 converter. To verify your
current version locate the firmware chip on the main
converter board or contact Mytek via email and
provide the serial number of converter.
(If necessary contact Mytek and request appropriate
firmware.)
Page: 4/24