Mytek Digital DIO MADI Card (ver. 1.4 / May 2011) - Manual (Page 22)

Mytek DIO MADI Card – User Manual
7. Attach power cord and other cabling.
8. Turn on the converter.
For about 2 seconds no LED should be lit on the
converter’s front panel, as new software is copied from
memory to the main board chips. Then, all LEDs should
turn on momentarily for about 10-30sec, and
subsequently the unit should begin normal operation.
Check Mytek webpage for information on the latest
firmware versions.
www.mytekdigital.com
www.mytekdigital.com Page: 22/24