Muchmore Cell Master Platinum (PT-CTXC) - Manual (Page 19)

5.USER SET UP
MAIN MENU
E 4
-LONG LOCK OUT-
TIME : 10:00
-OUTPUT CONTROL-
Pin using: FAN
- TIME VIEW -
MIN:SEC - 00:00
- TIME VIEW -
SEC - 00000
+2seconds
LONG LOCK OUT
Batteries that have been fully discharged can
cause fulse peak for several minutes.
Long lockout charge will cure this problem.
Set Long lock out time at this mode.
(more information->Page 6)
OUTPUT CONTROL
On the right side of the CM, it has output pins
for Muchmore’s cooling fan stand or Battery
warmer. Both can be controlled by
temperature(Output thermometer comes with
the CM)
TIME VIEW
You can choose Time view as two ways.
Minutes+Seconds or Only seconds.
-KEY TONES-
MELODY : 1
KEY TONES
Choose key tone as you like.(3 tones)
ERROR SOUND
Set the number of error and ending sound.
Once, 5times, 10times, 30times, Forever
LITHEUM ION/POLIMER FUNCTION
Turn on or off the Li-Ion charge function at
main menu.
- MELODY SELECT -
Start : 1
- ERROR SOUND -
5 times
- LI-ION Fun. -
Function ON
LOGO SET
Type your own name or favorite words for
opening display.
All saved data will be cleared if u click
button twice.
If the CM shows some broken letters, use this
function to cure the matter. - LOGO SET -
PLATINUM EDITION
- FACTORY RESET -
RESET
MELODY SELECT
Give own melody to Start(1~3), End(1~3), Error
sounds(1~3).
Cursor moves.
Enter
Select Enter
Value set up
e.g.
On in rest:42C
Fan stand will act over 42deg.C during rest time.
Warmer cut:35C
Battery warmer stops warming over 35deg.C
Select
Select