页 19, Factory reset – MOOER VEM Box User Manual

Page 19

Factory Reset

Factory Reset function will initialize all setting of VEM Box. All the user
patches will be erased and overwritten by the preset patches.
To do the factory reset, conform to the following instructions:

Before power on, set the Module Selector to [PATCH], hold down the
[PATCH -] and [PATCH +] footswitch and the [VALUE] button
simultaneously, and then power to the VEM Box, will appear on the
display and last flashing.

At that time, press [VALUE] button to confirm, will be flashing in a
faster speed for 2 seconds, then turn to display at a steady status
for 3 second, then back to the normal state, the factory reset operation
have been done.

Note: If you want to quit Factory Reset halfway, move the Module Selector to
another location, then the Factory Reset will be canceled.

HOLD

VALUE

PRESS

FASTER FLASHING
2 SECONDS

3 SECONDS

BANK

PATCH

EDIT

BANK

PATCH

EDIT

BANK

PATCH

EDIT

BANK

PATCH

EDIT

REC/OVERDUB

MODULE BYPASS

BYPASS / TUNER

HOLD FOR MUTE TUNING

PATCH

DATA

TRANS

PREAMP