MOOER VEM Box - Manual (Page 15)

14
Patch Pre-Select Recall Function
01
Patch Pre-Select function can let you select the patch first but
not to activate it, and then perform an additional step to activate
the patch.
To use this function, conform to the following instructions:
Before power on, hold down the [PATCH +] footswitch,
power to the VEM Box, will appear on the display and last
flashing for 3 seconds, it indicates setting up to Patch Pre-Select
function successfully. and then
BANK PATCH
EDIT DATA
REC/OVERDUB MODULE BYPASS
BYPASS
HOLD FOR LOOP
PATCH
02
In PATCH mode, select the patch to use
next. The selected new bank and patch’s
number flash on the display, but the sound
does not change yet.
BANK PATCH
EDIT DATA
03
Press both [PATCH -] and [PATCH +]
the selected patch will be activated, the sound changes, and
the display will stop flashing.
footswitches together,
REC/OVERDUB MODULE BYPASS
BYPASS / TUNER
HOLD FOR MUTE TUNING
PATCH
BANK PATCH
EDIT DATA
BANK PATCH
EDIT DATA
04
To return the normal patch selecting method, turn the power
off and then on again. The Patch Pre-Select function will not
preserve when power on again.