Millennia HV-3R Eight Channel Remote-Control Microphone Preamp v 1.4.2 - Manual (Page 37)

page 37 of 40 rev 1.4.2 041409 Millennia Media HV-3R
Troubleshooting
Problem Solution
Purple and Red Icons Trying to set up IDs and IP address while Ælogic is
running. Configure hardware before running the
software. Close Ælogic and restart it.
HV-3R powers up in Local Mode. Create and save startup mode
Unit doesn’t appear in Ælogic. Change mode to Remote on front panel
Parameters saved in the startup register have
changed. You had been using the unit in LAN mode with auto save
on.
It works in Pro Tools HD until the unit is powered
down and back on. Create and save startup mode for MIDI.
DHCP doesn’t work. You need to use a fixed IP address or install a DHCP
server on your network.