MF Digital Vantage (Rev: 06/01/02) - Manual (Page 62)

Vantage Series
Operator’s Guide
Document Revision: 110102
Page 61
Media type (required)
Check the type of media that corresponds to the media being used, CD-R or
DVD-R.
Jobs in progress
The Jobs in progress area displays the job currently running on the
Vantage. This area displays the: job name, type of operation, quantity,
number done, number rejected, status, and progress. The three buttons along
the right side of the Jobs in progress area are abort, pause, and status. The
abort button deletes jobs currently running. The pause button pauses the
current job, and the status button displays the status of the current job.
Finished jobs
The Finished jobs area displays the: job name, type of operation, quantity,
number done, number rejected, and the status. The two buttons to the right
of the Finished jobs area are the Remove and Details buttons.
•
Clicking Remove will clear selected jobs from the Finished jobs area.
•
Clicking Details will display the job information of the selected job in
the Finished jobs area, as seen below.
Recording Speed (Required)
The Speed pull-down allows you to set the recording speed as determined
by the capabilities of the recorders installed in the Vantage.
• Click the Speed pull down and select the desired recording speed,
maximum, 24x, 16x, 12x, 8x, or 4x.