MF Digital Vantage (Rev: 06/01/02) - Manual (Page 49)

Vantage Series
Operator’s Guide
Document Revision: 110102
Page 48
• Check the option box to enable the production option needed for your
job and click “Next”:
Operations and Options:
Copy When checked the discs in the submitted job will be
recorded using the disc image file selected in the
IMAGE field.
Verify When checked the CDs in the submitted job will
automatically be compared against the source files
after recording is completed. This feature works
with MediaFORM SmartDRIVEs only.
Print When checked the discs will be printed with the
disc label selected in the LABEL FILE field.
Test When checked the discs in the submitted job will
not be recorded.
Archive When checked an existing CD is saved to the hard
drive as a physical image file for later recording.
This option is used for duplicating existing discs
(see page 67).
Relay When checked an image of the top most disc
(master disc) is created on the hard drive and used
to make copies.
Speed The recording speed pull-down allows you to set the
recording speed as determined by the capabilities of
the recorders installed in the Vantage.
Print first When checked, Vantage will print the disc before
copying.