beautypg.com

MF Digital Vantage (Rev: 06/01/02) User Manual

Page 20

background image


Vantage Series

Operator’s Guide

Document Revision: 110102

Page 19

Making The Connection

Make sure the printer power switch is set to the off position.

Connect the supplied parallel printer cable to the printer port on the back

of the Spectrum2 and to the parallel port on the back of the host
computer.

Connect the supplied serial cable to the serial port on the back of the

Spectrum2 and to COM1 on the back of the host computer.

Connect one end of the power cord to the VAC Out on the Spectrum2

and the other to the wall power outlet.

Install the ribbon as shown in the Spectrum2’s documentation.