MF Digital 5000 Series - Manual (Page 58)

CD-3706/P Operator’s
Guide
Document Revision: 030501.1
5000 Series Operator’s Guide
Document Revision:080504
Page 57
• Use the default JOB ID or enter your own. This is a handy way to identify your
job making it easy to recognize what job is running.
• In the box under TOTAL, enter the desired quantity of discs
• Click on the BROWSE IMAGE button and select an image file to use (.ISC, .ISO,
or .IMG). Likely this will be the .ISC file made in the previous step.
• Leave LABEL blank as the CD-5906EC does not support in-line direct to disc
printing so you need not enter anything here. Consider the MF Digital 3000 Series
for automating duplication and printing if desired.
• Select the desired job options:
COPY: If you would like to write the disc, check this option. Typically this
will always be checked
VERIFY: If you would like to verify the disc, select this option. This will
perform a bit-for-bit verify of the disc. Selecting COPY and TEST
at the same time will perform a VERIFY on the disc once written
PRINT: Not applicable here, but on systems supporting direct-to-disc in-line
print, this option could be selected to enable printing