MF Digital 5000 Series - Manual (Page 17)

CD-3706/P Operator’s
Guide
Document Revision: 030501.1
5000 Series Operator’s Guide
Document Revision:080504
Page 16
• This displays the image size on the internal hard disk, time and date.
• This displays the Verify After status of the 5000. The Verify After
function will verify a copied disc against the master disc
immediately after it has been copied.
• This displays the Multiple Images status of the 5000. Multiple
images allows the user to store up to 6 separate master images on the
internal Hard Drive.
• This displays the Installed Memory of the 5000.
• This displays the number of good and bad copies that were produced
to date on the system
• Press the “2” key on the keypad. You will see several functions
scroll across the screen. Select a function by pressing the
corresponding number on the keypad. Enable or disable the function
by pressing the “Start/Yes” or “Stop/No” key.
• 0- The factory setting for this function is disabled. When enabled,
the Verify After feature automatically compares discs to the master
disc or hard disk image after copying is completed. Due to the nature
of the various compact disc formats, only CD-ROM Mode 1, CD-