MF Digital 5000 Series - Manual (Page 20)

CD-3706/P Operator’s
Guide
Document Revision: 030501.1
5000 Series Operator’s Guide
Document Revision:080504
Page 19
• Press the “Start/Yes” key to set the system time.
• If the “Stop/No” key is pressed you will be prompted to “Read
ATIP?”
When selected, the ATIP function allows you to determine the
manufacturer of the CD-R placed in drive 1 of the 5000. (Not
available on DVD)
• If you pressed the “Stop/No” key at you will be prompted to “Set the
Drive Order”:
• Press the “Stop/No” key if you do not want to reset the drive order.
Press the “Start/Yes” key and you will then see the following screen:
• All of the drives will open at this time:
• Close the drive tray of the drive you would like to be drive number
“1”. It can be any one of the drives. You will then see the following
screen:
• Close the remaining drives in order from top to bottom.
• If you pressed “Stop/No” to “Set Drive Order”, you will be
prompted to “Change Network Settings”. Pressing “Start/Yes” will
allow you to set-up the network client feature. Please see Setting
Up Network Client section (p. 36) for further details. Pressing
“Stop/No” will bring you back to the “Select Copy or Compare”
screen.