MF Digital 5000 Series - Manual (Page 21)

CD-3706/P Operator’s
Guide
Document Revision: 030501.1
5000 Series Operator’s Guide
Document Revision:080504
Page 20
• Press the “8” key on the keypad. The screen will now read (CD
version shown):
The factory setting for this function is “52x” for CD and “4x” for
DVD. When selected, the Select Recording Speed feature allows
you to set the copying speed as determined by the capabilities of the
recorders installed in the 5000.
• After pressing any of those keys, the screen will now read:
• Press the “9” key on the keypad. Something similar to the following
will be displayed in sequence:
This displays the status of the last disc copied or compared in each
of the 5000’s recorders. If the last operation performed was
successful, the screen will report “OK”. If problems were
encountered, an error message will be displayed.