MF Digital 5000 Series - Manual (Page 31)

CD-3706/P Operator’s
Guide
Document Revision: 030501.1
5000 Series Operator’s Guide
Document Revision:080504
Page 30
Comparing From A Hard Disk Image
For quality control purposes, the 5000 Series is equipped with powerful
verification capabilities. Copied discs can be compared against hard disk images.
This feature ensures copying integrity.
Note: Due to the nature of the various compact disc formats, only
CD-ROM Mode 1, CD-ROM Mode 2, CD-ROM XA Mode 2
Form 1, and most CD formats can be compared.
Multiple Images Disabled
To compare copied discs to a hard disk image that was previously created
with the Multiple Images feature “disabled” (i.e. from a single hard disk
image), the steps are as follows:
• From the main operating screen depicted below:
• Load the copied discs to be compared into the CD-R/RW recorders.
• Press the “COMPARE” key on the keypad. The screen will now read:
• Press the “START/YES” key. The screen will now read:
Progress will be displayed on the screen during the operation:
Upon successful completion, the compared disc(s) will be ejected.
The screen will now read: