MF Digital USB SD 5000 Platform Series - Manual (Page 8)

8
© www.mfdigital.com USB SD Platform 5000 series
2.3 Capacity check
This function checks the actual capacity of the Flash card.
Plug the SD/USB card into a slot and then select function 4 which is “Capacity
Check”, then press OK. Approximately 3 seconds later the system will display the
exact capacity of the USB/SD card and whether it can be used or not.
The System will use the Green LED to indicate the card is suitable for use and the
Red LED to indicate that the card is not suitable for use. The
buttons can be
used to check the progress of the “Capacity Check”.
Note: When the Red LED is lit this indicates an error and you can use the
buttons to check the error information.
(Red Light indicates incorrect size)
(Green Light indicates correct size) )
This function can support the asynchronous operation so the user can continuously
plug in and pull out USB/SD cards as required; there is no need to push any further
buttons once the process has been started.
2.4 USB/SD information
This display will show the USB/SD flash’s basic information such as flash type,
content size and total capacity.
USB total capacity
File content size
File Format
Port Number Being Checked