MF Digital USB SD 5000 Platform Series User Manual

Page 15

www.mfdigital.com

USB SD Platform 5000 series

7.0 Utility

7.1 Start-up Menu - To select which function is
shown first when the system is first turned on.

7.2 Copy Area
7.2.1 Only Data Area – Use the system to
automatically detect the format (FAT16/32,
NTFS, Linux, Ext2, Ext3) and only copy the
data area.
7.2.2 Whole Media – the system will copy the
whole content of the flash including the empty
space area if the target is not formatted to any
of the following; FAT16/32, NTFS, Linux, Ext2,
Ext3.

7.3 Button Beep - Choose whether to hear a
beep when a button is pressed.

7.4 Asynchronous Hold Time - To set how long
the system will wait to continue or exit the
function of the Asynchronous copying job.

7.5 Ignore Size - To set the tolerance % of the
source and target flash cards. The default
setting is “don’t care”.

7.6 Asynchronous - “On” to enable
Asynchronous copy mode. “OFF” to disable
Asynchronous copy mode.

7.7 Language - Set language of system
interface.

7.8 Working Mode – Use this function to setup
“Turbo mode” or “Normal mode”.