MF Digital USB SD 5000 Platform Series - Manual (Page 6)

6
© www.mfdigital.com USB SD Platform 5000 series
2.0 Function Overview
The system offers both Asynchronous and Synchronous
Copy . Initially the system will
check the content size of the source. If the source content size is less than system’s
buffer memory it will automatically start the asynchronous copy process. If the
source content size is larger than the system’s buffer memory it will automatically
start the synchronous copy process. The purpose of the compare function is to verify
the target data and ensure it is the same as the source data.
2.1 Synchronous Copy
Plug in the source flash card and select either the copy, compare or the
copy/compare function and then press OK.
Plug in the target flash cards. The LCD display will show the number of target flash
plugged into the unit that are ready for copying.
When all the flash cards are plugged in, press OK to start the copying process. Or
when all slots are filled the system will automatically start the copying process
When the copying has finished the LCD display shows whether the copying has
succeeded or failed. It also shows the quantity that was copied and the time that it
took.
Note:
When the copying process is in operation the green LED lights will flash.
When the copying process has finished the green LED lights will stop
flashing and remain a solid green. If an error occurs the red LED light will
Content size
Content Copied
Time Elapsed & % Completed